Supermicro H8QGI-LN4F

MBD-H8QGI-LN4F-O
Supermicro H8QGI-LN4F
£766.29
ex. VAT
(£919.55
inc. VAT)
This product is ordered upon request on a 3 - 5 Days lead-time.
Quantity
 
 
Email me when in stock
Looking for Compatible Products?

Key Features

  1. Four AMD Opteron™ 6000 series (6300 ready) processors (Socket G34) 16/12/8/4-Core ready; HT3.0 Link support
  2. AMD SR5690 / SR5670 / SP5100 Chipset
  3. Up to 1TB DDR3 1600MHz ECC Registered DIMM; 32x DIMM sockets
  4. Intel® I350 4-Port Gigabit Ethernet Controller
  5. 6x SATA2 (3.0 Gbps) ports via AMD SP5100 Controller; RAID 0, 1, 10
  6. 2x PCI-E 2.0 x16 slots, 2x PCI-E 2.0 x8 slots
  7. Integrated Matrox G200eW Graphics
  8. Integrated IPMI 2.0 with Dedicated LAN

Specifications

Product SKUs
MBD-H8QGi-LN4F
  • H8QGi-LN4F (Standard Retail Pack)
 
Physical Stats
Form Factor
  • SWTX
Dimensions
  • 16.48" x 13" (41.9cm x 33.0cm)
 
Processor/Chipset
CPU
  • Quad 1944-pin Socket G34
  • Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD SR5690 / SR5670 / SP5100 Chipset
 
System Memory
Memory Capacity
  • 32 DIMM sockets
  • Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
  • Quad channel memory bus
  • For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® I350 controller, 4-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200eW 16MB DDR2 graphics
Super I/O
  • Winbond® W83527 chip
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 4 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 2x internal headers-4x ports, and 1x type A
VGA
  • 1x VGA port
Serial Ports
  • 1x serial port header
IPMI
  • 1x dedicated IPMI LAN port; WPCM450
Others
  • 1 SATA DOM power connector, TPM header
 
Expansion Slots
PCI-Express
  • 2x PCI-E 2.0 x16 slots
  • 2x PCI-E 2.0 x8 slots
Chassis ( Optimized for H8QGi-LN4F )
1U Chassis
2U Chassis
  • CSE-828TQ+-R1400LPB
    Requires rev. K chassis, air shroud MCP-310-82801-0N*
  • CSE-828TQ+-R1K43LPB
    Requires rev. K chassis, air shroud MCP-310-82801-0N*
Tower / 4U Rackmount
Note
  • * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list.
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 9-fan status tachometer monitoring
  • Up to nine 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 9x fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS
RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8QGi-LN4F MBD-H8QGi-LN4F -O 1 H8QGi-LN4F Motherboard
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Shield MCP-260-00060-0N 1 STANDARD I/O SHIELD FOR H8QG7+ -LN4F WITH EMI GASKET





Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal