Allied Telesis 10/100TX to 10FL/100SX 850nm Fibre ST Media Converter

The Allied Telesis range of 850nm fibre Fast Ethernet media converters allows users to extend the size of UTP networks with the use of fibre cabling. Converting between 10T and 10FL or 100TX and 100SX fibre quickly and reliably, the AT-MC115XL and AT-MC116XL address the growing demand for a low-cost solution for fibre installations of up to 300mt for 100SX and up to 2km for 10FL. To maximize flexibility, the converters are available in ST (AT-MC115XL) and SC (AT-MC116XL) fibre connector styles. The AT-MC115XL and AT-MC116XL auto-negotiate during the link up phase of the connection to set the speed (10/100) and operation mode (Full or Half Duplex). When connecting media converters to auto negotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half duplex mode, allowing the link to be established with the greatest bandwidth. The MissingLink feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, failure in one fibre link will be signalled to the switch, allowing the second link to become active.



All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable. This Link Test feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment. Each media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.Features

• 10/100TX copper port
• 10/100SX fibre port
• Full and Half Duplex operation
• Transparent to 802.1Q packets
• Fits the AT-MCR12 rackmount chassis
• MDI/MDIX
• MissingLink
• Link Test
• Auto-negotiation

Specifications

Compliance
Certifications	EMC: FCC Class A, FCC Class B � Safety: UL-Cul, CSA/CSA, NRTL, TUV,CE compliant
Electrical
Voltage	100 to 240VAC
Power Adaptor Type	External
Environmental
Environmental	Operating Temperature 0 to 40�C - Humidity 5 to 95%
General
Model Name	AT-MC115XL
Barcode	767035151441
Interfaces/Ports
Fiber Ports	1 x ST Connector
RJ-45 Ports	1 x RJ-45
Physical
LED Status Indicators	Power � Normal � Recieve � 10 � 100
Dimensions	10.5cm (W) x 9.5cm (D) x 2.5cm (H) - Weight 0.294kg

Write a Review

Name *

Email *

Your Rating

Your Review*