Allied Telesis AT-MC13 UTP to Fibre ST Ethernet Media Converter

The Allied Telesis range of Ethernet media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting all major fibre connectors, with support for both multi and single-mode fibre, these converters can be used to extend networks with up to 15km of fibre. When connecting media converters to auto-negotiating Fast Ethernet switches, these media converters (except the AT-MC13 and AT-MC14) will automatically connect the link in either Ethernet Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. In addition, the Missing Link feature (except AT-MC15) allows switches or hubs with redundant link capability to be inter-connected with these media converters, as a failure in one fibre link will be signalled to the switch, allowing the second link to become active.



All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch, with a simple UTP cable. The media converters also allow the installer to test the integrity of the fibre connection, by forcing the converters to communicate over the fibre cable. This 'Link Test' feature allows installers to check for cable faults without the need for expensive fibre optic test equipment. Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.Features

• Half and Full Duplex operation (Excluding AT-MC15, Half Duplex only)
• Fits the AT-MCR12 rackmount chassis
• MDI/MDIX
• MissingLink
• Link Test

Specifications

Compliance
Certifications	FCC Class A � UL-Cul, CSA/CSA, NRTL, TUV,CE compliant
Electrical
Voltage	100 to 240VAC
Current	0.5Amps
Environmental
Environmental	Operating Temperature 0 to 40�C - Humidity 5 to 95%
General
Model Name	AT-MC13
Barcode	767035120973
Interfaces/Ports
Fiber Ports	1 x ST Connector
RJ-45 Ports	1 x RJ-45
Physical
Dimensions	10.5cm (W) x 9.5cm (D) x 2.5cm (H) - Weight 0.294kg

Write a Review

Name *

Email *

Your Rating

Your Review*