Allied Telesis Secure Network Interface Card 100FX (SC), PCIe x 1, Secure NIC

The AT-2712FX (available with SC connector) Network Interface Card is an ideal fit for fiber to the desktop networks that depend on secure and reliable systems. With a small form factor PCIe x1 bus the AT-2712FX is an ideal fit for government, education or other networks dependent on highly secure capabilities. Allied Telesis�AT-2712FX card is designed to provide desktop computers with network connections through a high-speed multi-mode fiber-optic link with and SC interface.The AT-2712FX supports the Microsoft Windows 2003, XP and Vista operating systems, and is compliant with industry standards. Allied Telesis�AT-2712FX interface cards feature software to assist users with network setup and configurations. An offline user diagnostics program provides system administrators and engineers with a valuable tool to analyze the interface card and check data. Finally, the Broadcom Advance Control Suite program simplifies controlling and configuring all AT-2712FX cards. IP Security (IPSec) is a suite of protocols for securing Internet Protocol (IP) communications by authenticating and/or encrypting each IP packet in a data stream.The cryptographic algorithms that are used in IPSec operation are computationally intensive, which can overwhelm the host CPU at high network speeds.



The AT-2712FX implements hardware that performs these computationally intensive cryptographic algorithms, which is known as IPSec task offload v2. The AT-2712FX supports the transport mode of IPSec Authentication Header (AH) and Encapsulation Security Payload (ESP) protocols for end-to-end security of packet traffic. Simultaneous AH and ESP task offload is also supported for up to 32 Security Associations (SA). The Desktop and mobile Architecture for System Hardware (DASH) is a DMTF management initiative that represents a suite of specifications which standardize the manageability interfaces for mobile and desktop hardware.The DASH suite of specifications defines the interfaces for management in the form of protocols and profiles for representing mobile and desktop hardware. Fundamental to the DASH is the underlying goal to unify the experience achieved through out-of-band mechanisms with those available via the operating system. Hassle Free Support All Allied Telesis Network Interface Cards offer technical support, ensuring trouble-free installation.Features

• Advanced centralized power management
• Secure data transmission
• NDIS 6 IPSec task offload compliant (Vista logo compliant)
• 32 security associations
• DASH manageability complaint with v1.1 as defined by the desktop and mobile workgroup
• IPv4 and IPv6 Large Send Offload and
• Checksum Offload (LSO/TCO)
• Wake on LAN (WoL) support meeting ACPI requirements
• Wake-on-LAN (WoL) supported (enabled by default, utility to disable available in firmware)
• Statistics for SNMP MIB II
• Standard and low-profile brackets provided

Specifications

Compliance
Ethernet Standards	IEEE 802.3u: Fast Ethernet
Compliant Standards	IEEE 802.3x: Full-duplex � PCIe x1 � DASH v 1.1.0
Safety	UL60950-1 (cULUS), EN60950-1 (TUV) EN60825
Immunity	EN55024
EMI	EMI part 15: FCC class A, EN55022 class A, VCCI class A, C-Tick, CE
Electrical
Power Consumption	760mA
Environmental
Environmental	Operating Temperature 0 to 40�C - Humidity 5 to 95%
General
Model Name	AT-2712FX
Product Type	Network Card
Barcode	767035191508
Interfaces/Ports
Connector	SC
Physical
Status Indicators	1 LED indicating link/activity
Pack Quantity	1
In The Box	Standard or low-profile brackets provided (low profile fitted)
Dimensions	10.7cm (W) x 5.6cm (H) - Weight .04kg
System Requirements
Operating Systems Supported	Windows XP � Windows 2003 � Windows Vista � Windows 7 � Linux

Write a Review

Name *

Email *

Your Rating

Your Review*