Allied Telesis Secure Network Interface Card AT-2912T 10/100/1000T, PCIe x 1, secure NIC

The AT-2912T Network Interface Card is an ideal fit for networks that depend on secure and reliable systems. With a small form factor PCIe x1 bus the AT-2912T is an ideal fit for government, education or other networks dependent on highly secure capabilities. � The AT-2912T supports the Microsoft Windows 2003, XP and Vista operating systems, and iscompliant with industry standards.The cards feature software to assist users with network setup and configurations. An offline user diagnostics program provides system administrators and engineers with a valuable tool to analyze the interface card and check data. Finally, the Broadcom Advance Control Suite program simplifies controlling and configuring all AT-2912T cards. � IP Security (IPSec) is a suite of protocols for securing Internet Protocol (IP) communications by authenticating and/or encrypting each IP packet in a data stream.The cryptographic algorithms that are used in IPSec operation are computationally intensive, which can overwhelm the host CPU at high network speeds.The AT-2912T implements hardware that performs these computationally intensive cryptographic algorithms, which is known as IPSec task offload v2. The AT-2912T supports the transport mode of IPSec Authentication Header (AH) and Encapsulation Security Payload (ESP) protocols for end-to-end security of packet traffic. Simultaneous AH and ESP task offload is also supported for up to 32 Security Associations (SA).



The Desktop and mobile Architecture for System Hardware (DASH) is a DMTF management initiative that represents a suite of specifications which standardize the manageability interfaces for mobile and desktop hardware.The DASH suite of specifications defines the interfaces for management in the form of protocols and profiles for representing mobile and desktop hardware. Fundamental to the DASH is the underlying goal to unify the experience achieved through out-of-band mechanisms with those available via the operating system. � All Allied Telesis Network Interface Cards offer technical support, ensuring trouble-free installation.Features

• Advanced centralized power management
• Secure data transmission
• NDIS 6 IPSec task offload compliant (Vista logo compliant)
• 32 security associations
• DASH manageability complaint with v1.1 as defined by the desktop and mobile workgroup
• IPv4 and IPv6 Large Send Offload and Checksum Offload (LSO/TCO)
• Wake-on-LAN (WoL) support meeting ACPI requirements
• Wake-on-LAN (WoL) supported (enabled by default, utility to disable available in firmware)
• Statistics for SNMP MIB II
• Standard and low-profile brackets provided
• Remote Boot (PXE 2.0)
• Advance cable diagnostic
• Large send offload

Specifications

Compliance
Ethernet Standards	IEEE 802.1Q: VLANs � IEEE 802.3ab: Gigabit Ethernet � IEEE 802.3ad: Link Aggregation � IEEE 802.3ap: Priority � IEEE 802.3u: Fast Ethernet � IEEE 802.3x: Full-duplex
Compliant Standards	PCIe x1 � DASH v 1.1.0
Safety	UL60950-1 (cULUS), EN60950-1 (TUV) EN60825
Immunity	EN55024
EMI	EMI part 15: FCC class A, EN55022 class A, VCCI class A, C-Tick, CE
Electrical
Power Consumption	760mA
Environmental
Environmental	Operating Temperature 0 to 40�C - Humidity 5 to 95%
General
Model Name	AT-2912T
Barcode	767035191522
Interfaces/Ports
Connector	Connector type: RJ-45
Physical
Status Indicators	1 LED indicating link/activity
Pack Quantity	1
In The Box	Standard or low-profile brackets provided (standard fitted)
Dimensions	10.7cm (W) x 5.6cm (H) - Weight 0.04kg
System Requirements
Operating Systems Supported	Windows XP � Windows 2003 � Windows Vista � Windows 7 � Linux

Write a Review

Name *

Email *

Your Rating

Your Review*