|
Intel® Xeon Processor E3-1200 family; socket H2 (LGA 1155). | |||
|
Intel C202 PCH Chipset. | |||
|
1 x 3.5'' or optional 2 x 2.5'' internal SATA2 hard drive bays. | |||
|
1 x PCI-E 2.0 x8 slot. | |||
|
Up to 32GB DDR3 ECC 1333/1066MHz UDIMMs. | |||
|
Intel 82579LM and 82574L, 2 x Gigabit Ethernet LAN ports. |
Motherboard | Super X9SCL-F |
Processor/Cache | |
CPU | Intel Xeon processor E3-1200 family, Intel 2nd Generation Core i3 & Intel Pentium® family processors Socket H2 (LGA 1155) Note: supports CPUs with max. TDP ≤ 45 Watts |
System Memory | |
Memory Capacity | 4x 240-pin DDR3 DIMM sockets Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) 1333/1066MHz Support ECC DDR3 UDIMM only |
Memory Type | 1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 8GB, 4GB, 2GB, 1GB |
Memory Voltage | 1.5 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices | |
Chipset | Intel® C202 PCH chipset |
SATA | 6x SATA 2.0 (3Gbps) w/ RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
Network Controllers | Intel® 82579LM and Intel® 82574L, 2x Gigabit Ethernet LAN ports Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
VGA | Nuvoton WPCM450RA0BX |
Super I/O | Nuvoton NCT6776F |
Input / Output | |
Serial ATA | 6 SATA 2.0 ports Up to 2 SATA hard drives supported |
LAN | 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 2x USB rear ports 1x USB Type-A 6x USB ports via header Total 9 USB 2.0 Compliant |
VGA | 1x VGA port |
Serial Port / Header | 2x Fast UART 16550 serial ports (one header and one rear port) |
Chassis | |
Form Factor | 1U Rackmount |
Model | CSE-510L-200B |
Dimensions | |
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 11.3" (287mm) |
Gross Weight | 11 lbs (4.99 kg) |
Available Colors | Black |
Front Panel | |
Buttons | Power On/Off button System Reset button |
LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
Expansion Slots | |
PCI-E | 1x PCI-E 2.0 x8 slot |
Drive Bays | |
HDD | 1x 3.5" or optional 2x 2.5" internal SATA2 hard drive bays |
Backplane | SAS/SATA HDD Backplane (SAS support requires optional SAS controller) |
System Cooling | |
Fans | 2x 8500 RPM 40x28mm PWM cooling fans |
Power Supply | |
200W Low Noise AC-DC power supply with PFC | |
AC Voltage | 100 - 240V, 50-60Hz, 3-1.5 Amp Max |
+5V | 16.0 Amp |
+5V standby | 2.0 Amp |
+12V | 15.0 Amp |
-12V | 0.8 Amp |
+3.3V | 17.0 Amp |
System BIOS | |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
Operating Environment / Compliance | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
MOTHERBOARD SPECIFICATION
Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & E3-1200 v2
series, 2nd and 3rd Gen Core i3
processors***, Pentium, Celeron
2. Intel® C202 PCH Chipset
3. Up to 32GB DDR3 ECC 1333MHz /
1600MHz*** UDIMMs in 4 sockets
4. Intel® 82579LM and 82574L,
2x Gigabit Ethernet LAN ports
5. 6x SATA 2.0 with RAID 0, 1, 5, 10
6. 2x (x8) PCI-E 3.0*** in x8 slots and
1x (x4) PCI-E 2.0 in x8 slot
7. 9x USB 2.0 ports
(2 rear + 6 via header + 1 Type-A)
8. Integrated IPMI 2.0 with KVM and
Dedicated LAN
|
|
There are currently no reviews against this product. Be the first to write a review!
Sorry there are no compatible products listed. Please contact us to discuss options available for this product.
There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.
Facebook
Twitter
LinkedIn
Instagram
Call us today on 01283 576162 to talk directly to one of our server specialists
Who we are
Europe's specialist value added distributor of server chassis, server components and server systems.
Server Case is a specialist server chassis distributor based here in the United Kingdom, with an extensive range of 19” rackmount cases built to suit a variety of environments; including remote industrial servers and everything in between. Furthermore, our distribution partnerships have allowed us to develop and deliver Server Barebones and fully configured systems to the vast IT Channel and Enterprise customers.
Latest Blog
Exploring the World of Barebone Servers: A Comprehensive Guide
Posted on: 5th Apr 2024
In the ever-evolving landscape of information technology, businesses are constantly seeking efficient, cost-effective solutions to meet their server needs. One option that has gained popularity in recent years is the barebone server. Offering a customisable, budget-friendly alternative to pre-built servers, barebone servers provide businesses with the flexibility to tailor their hardware to specif... [...] Read more
Latest Video
View more of our reviews, unboxing and installation videos on YouTube.
Business Links
Site Information