Supermicro SuperServer 1027GR-TRT2

SYS-1027GR-TRT2
Supermicro SuperServer 1027GR-TRT2
£1,522.82
ex. VAT
This product is currently out of stock. We are expecting stock in Ordered On Request
Quantity
 
 

Key Features

  1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
  2. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM sockets
  3. 3x PCI-E 3.0 x16 slots (3x GPU/Xeon Phi cards optional), 1x PCI-E 3.0 x8 (in x16) LP slot
  4. Integrated IPMI 2.0 with KVM and Dedicated LAN
  5. Intel X540 Dual port 10GBase-T
  6. 4x Hot-swap 2.5" SATA3 Drive Bays
  7. 1600W Redundant Power Supplies Platinum Level (94%+)
  8. 10x Counter rotating fans w/ optimal fan speed control
  9. Smart server management tools

Specifications

Product SKUs
SYS-1027GR-TRT2
  • SuperServer 1027GR-TRT2 (Black)
 
Motherboard

Super X9DRG-HTF+II
 
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 130W TDP)
Note † BIOS version 3.0 or above is required
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
GPU/Xeon Phi Support
  • M2090, up to 130W CPU at 30°C
  • M2075, up to 130W CPU at 35°C
  • K10/K20/K20X (Kepler), up to 130W CPU at 30°C
  • Xeon Phi, up to 130W CPU at 30°C
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC Registered memory (RDIMM)
  • Up to 128GB DDR3 ECC and non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors
      (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 Chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • Nuvoton WPCM450 BMC
 
Input / Output
SATA
  • 2x SATA3 (6Gbps) ports
  • 2x SATA2 (3Gbps) ports
LAN
  • 2x RJ45 10GbE ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 2.0 ports
Video
  • 1x VGA Connector
Serial Port
  • 1x Serial header
 
System BIOS
BIOS Type
  • 16Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-118GH-R1K66B
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 30.6" (777mm)
Gross Weight
  • 48 lbs (21.8 kg)
Available Color
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
 
Expansion Slots
PCI-Express
  • 3x PCI-E 3.0 x16 slots
    (3x GPU/Xeon Phi cards optional)
  • 1x PCI-E 3.0 x8 (in x16) low-profile slot
 
Drive Bays
Hot-swap
  • 4x 2.5" Hot-swap drive bays
 
System Cooling
Fans
  • 10x counter-rotating fans with optimal fan speed control
 
Power Supply
1000W/1600W 1U Redundant Power Supply
AC Input
  • 1000W @ 100-127V, 12.9A Max., 50-60Hz
  • 1600W @ 200-240V, 9.5A Max., 50-60Hz
DC Output
  • 1000W: +12V/82A; +12Vsb/2A
  • 1600W: +12V/132A; +12Vsb/2A
Certification Platinum Level Certified94%+  Platinum Level
  (Cert. in progress)
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of ten 4-pin PWM fans
  • 10x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 10x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)



Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal