Supermicro SuperServer 8017R-7FT+

SYS-8017R-7FT+
Supermicro SuperServer 8017R-7FT+
£1,723.67
ex. VAT
This product is currently out of stock. We are expecting stock in Ordered On Request
Quantity
 
 
Product SKUs
SYS-8017R-7FT+
  • SuperServer 8017R-7FT+ (Black)
 
Motherboard

Super X9QR7-TF+
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-4600 v2
        (12-Core)** or E5-4600 (8-Core)
        family (up to 130W CPU at 35°C)
  • Quad Socket R (LGA 2011)

    ** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
 
System Memory
Memory Capacity
  • 32x 240-pin DDR3 DIMM sockets
  • Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM sockets
Memory Type
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5
  • SATA 3.0 6Gbps with RAID 0, 1
SAS
  • SAS2 (6Gbps) via LSI® 2208 controller
  • HW RAID 0, 1, 5 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
  • Matrox G200eW (Nuvoton WPCM450 BMC)
Super I/O
  • Nuvoton W83527HG
 
Input / Output
SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
SAS
  • 8x SAS2 ports (6Gbps)
LAN
  • 2x RJ45 10GBase-T ports
  • 1x dedicated LAN port for IPMI
USB
  • 4x USB 2.0 rear ports
Video
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
 
System BIOS
BIOS Type
  • 16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-818A-1K43LPB
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 27.75" (705mm)
Weight
  • Gross: 48.5 lbs / Net: 27 lbs
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16 Low-profile Slot
 
Drive Bays
Hot-swap
  • 3x 3.5" Hot-swap SAS2/SATA3 HDD Bays with RAID 0, 1, 5 (Hardware RAID)
 
Backplane
SAS/SATA HDD Backplane
 
Peripheral Drives
DVD-ROM
  • 1x Slim DVD-ROM (Optional)
 
System Cooling
Fans
  • 7x 4cm Counter-rotating fans with optimal fan speed control
Shroud
  • 1x Air Shroud
 
Power Supply
1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage
  • 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
  • 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby
  • 6 Amp
+12V
  • 100 Amp/115 Vac
  • 117 Amp/230 Vac
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Platinum Certified  
  Platinum Certified
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
  • 4-pin fan headers with tachometer status monitoring
  • Low noise fan speed control mode
Temperature
  • Monitoring for CPU and system environment
  • Thermal Control for 10x fan connectors
Other Features
  • Chassis intrusion detection
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
See Parts List

Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9QR7-TF+
CSE-818A-1K43LPB
1
1
Super X9QR7-TF+ Motherboard
CSE-818A-1K43LPB 1U Chassis
Air Shroud MCP-310-81809-0B 1 Mylar air shroud for SC818A (X9QRi/7-TF+)
Backplane BPN-SAS-818A 1 supports 3 SAS/SATA (3.5") w/ MG9071
Cable 1 CBL-0385L 1 40cm RA HDD backplane power extension 4 pin to power cable for SC818A
Cable 2 CBL-0108L-02 1 IPASS TO IPASS 39CM PBF
Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PCI-E x16 output
Heatsink / Retention SNK-P0047PS 4 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Cable 3 CBL-0087 1 Front Control Cable Round 16 pin to 16 pin Ribbon 20
Cable 4 CBL-0154L 1 AC POWER CABLE FOR SC818, 36.5CM PBF
Cable 5 CBL-0174L 1 US power cord 14AWG 6ft, PBF.2.08mm^2
Fan 1 FAN-0101L4 6 40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808
Drive Tray(s) MCP-220-00093-0B 3 Black 3.5
Mounting Rails MCP-290-00101-0N 2 Outer rail, screw type, 25.6\" to 33.05\"
Mounting Rails MCP-290-00111-0N 2 Inner rail, extension, long, screw type
Mounting Rails MCP-290-00016-0N 1 1U open rack bracket set for CSE-PT51L,MCP-290-00054-0N
Mounting Rails MCP-290-00105-0N 2 Inner rail, front, screw type
Power Supply PWS-1K43F-1R 1 1400W digital power supply
Optional Parts List
  Part Number Qty Description
2.5" HDD/SSD Tray MCP-220-00043-0N - Black hotswap gen 4 3.5 to 2.5 HDD tray

Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal