3 x 3.5" SATA Hot Swap into 2 x 5.25" Drive Bays

3 x 3.5" SATA Hot Swap into 2 x 5.25" Drive Bays
ex. VAT
inc. VAT)
This product is currently out of stock.
Call/Email/Live Chat our sales team for availability, we look forward to hearing from you.
Email me when in stock
Looking for Compatible Products?

Frequently bought together

Single 1U 500W 80 plus PSU
Single 1U 500W 80 plus PSU
£80.81 ex VAT
(£96.97 inc VAT)
550W ATX PS/2 Server Grade PSU - 80 Plus Bronze - 2x 80mm Fans
5 x 3.5
5 x 3.5" SATA Hot Swap into 3 x 5.25" Drive Bays
£63.92 ex VAT
(£76.71 inc VAT)
Single 2U 500W 80 Plus PSU
Single 2U 500W 80 Plus PSU
£83.21 ex VAT
(£99.86 inc VAT)

- SC-H300  3 x 3.5" SATA/SAS Hot Swap into 2 x 5.25" Drive Bays
- Supporting 3 Bay SATA-I, II amd III /SAS Hot-swap  6GB/s
- Steel material, ROHS compliance
- Electromagnetism shield design
- Redundant 2-pin molex power connectors
- Support hot-swap
- Supporting all operating systems
- Ball bearing fan with air duct
- Supporting RAID 0,1,5,6,10 functions( Raid card required)

Drive bay: turn 2×5.25" drive bay to 3×3.5" hot-swap drive bay
: 3 discrete SATA / SAS connectors
Fan sensor: Fan failure sensor
: overheating alarm
Cooling system: 1×80mm ball bearing fan with air duct providing excellent cooling air flow
RAID: support RAID 0,1,5,6,10 functions( Raid card required)
Power connector: 2×4-pin molex power connector
Data connector: 3×SATA( I, II or III) /SAS data port 6GB/s
Dimension(L×W×H): 220mm x 146mm x 84mm
Weight: 1.8 Kg


Similar to Norco SS-300

Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

Customer Reviews

Jonathan Buzzard

Excellent little hot swap drive enclosure; just perfect for my upgraded home server. The fan is noisy and it is made from finest Chinesium so I replaced it with a Noctura NF-A8 NX, which is dead easy. With a little help from a soldering iron to make a slot in the fan shroud the new fan is being powered via one of the system fan headers on the motherboard. That way I can easily monitor it for fan failure. Fan noise is a lot lower and it is also likely to last a lot longer too. With three 6TB enterprise SATA drives I see temperatures in mid 30's Celsius to just under 40 on a hot day, which is just fine.

Review Submit 11th Feb 2022

Andrew Swan

The drive case arrived on time, great in these difficult times. Fits exactly where I wanted it for as a base for my new drives.. Will use server case again as and when required.

Review Submit 9th May 2020

Alan Gray

Installation was fairly straightforward, it behaving like a block of two full height units. I was concerned I might have problems with the fatter 4Gb WDC drives I'm using, but no problem. The three installed drives are running at 32-33 degrees C . Previous unfanned sata trayless eclosures were showing 41-42 degrees C.. Others have complained of fan noise, but the location meant this was not an issue for me. In any case it looks easy enough to change.

Review Submit 5th Jun 2019

Write a Review



Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal