Supermicro X11SSZ-TLN4F

Supermicro X11SSZ-TLN4F

Part Code: MBD-X11SSZ-TLN4F-O

Features

Supermicro X11SSZ-TLN4F
Click on a thumbnail below to view a larger image.
  • Photo 1
Note: We do our best to ensure that the photo's shown are of the current revision of each product, however please contact us if you need to confirm the cosmetic design shown is correct before ordering. The hardware components shown in the photo's are not included and are for illustrative purposes only, please call to confirm if in any doubt.

Product Description

Key Features

  1. Single socket H4 (LGA 1151) supports     Intel® Xeon® processor E3-1200 v5, Intel® 6th Gen. Core™ i7/i5/i3 series, Intel® Celeron® and Intel® Pentium®
  2. Intel® C236 chipset3. Up to 64GB DDR4 2133MHz ECC/non-ECC Unbuffered UDIMM; 4x DIMM slots
  3. Expansion slots: 1x PCI-E 3.0 x16 (in x16), 2x PCI-E 3.0 x4 (in x8)
  4. Dual 10GbE and dual GbE LAN ports6. 4x SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10
  5. 2x DP, 1 DVI-I, 3x independent displays via Intel HD Graphics, VGA port for BMC
  6. I/O: 1x SATA DOM, 2x COM, TPM 1.2 header, ALC 888S HD Audio
  7. 4x USB 3.0 (2 rear + 2 via header) 9x USB 2.0 (2 rear + 6 via headers + 1 Type A)
  8. Support 12V DC power
  9. AMT 11.0

 

Product SKUs
MBD-X11SSZ-TLN4F -B
  • X11SSZ-TLN4F (Bulk Pack)
 
Physical Stats
Form Factor
  • microATX
Dimensions
  • 9.6" x 9.6", (22.4cm x 22.4cm)
 
Processor/Cache
CPU
  • Single Socket H4 (LGA 1151) supports:
  • Intel® Xeon® processor E3-1200 v5,
    Intel® 6th Gen Core™ i7/i5/i3,
    Intel® Pentium®,
    Intel® Celeron® processors
  • CPU TDP up to 95W
 
System Memory
Memory Capacity
  • 4x 288-pin DDR4 DIMM slots
  • Up to 64GB DDR4 ECC/Non-ECC UDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72/64-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
  • 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C236 chipset
SATA
  • SATA3 (6Gbps) via C236 controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Dual 10GbE LAN ports via Intel® X550
  • Single GbE LAN port via Intel® I210-AT
  • Single GbE LAN port via Intel® PHY I219LM
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
  • RealTek ALC 888S High Definition Audio
Graphics
  • ASPEED AST2400 BMC
 
Input / Output
SATA
  • 4x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 10Gigabit Ethernet LAN ports
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (2 rear + 2 via header)
  • 9x USB 2.0 ports (2 rear + 6 via headers + 1 Type A)
Audio
  • Front Panel Audio Header
Video/Display
  • 2x DP (Display Ports), 1x DVI-I via Intel® HD Graphics with 3x Independent Displays, 1x VGA port for Aspeed AST 2400 BMC
Serial Port / Header
  • 2x COM ports (2 headers)
SuperDOM
  • 1x SuperDOM (Disk on Module) ports with built-in power
TPM
  • 1x TPM 20-pin Header
Chassis (Optimized for X11SSZ-TLN4F )
1U Chassis:
2U Chassis:
Mid/Mini Tower Chassis:
4U / Tower Chassis:
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 

 
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 (in x16) slot
  • 2 PCI-E 3.0 x4 (in x8) slots
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.7.1
  • UEFI 2.3.1
  • RTC (Real Time Clock) Wakeup
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Keyboard Wakeup from Soft-Off
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
  • Total of 6 fan headers supporting up to 6 fans
  • 6 fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS
  • RSTe
  • 8-pin 12V DC Power Support
 
Operating Environment
Operating Temperature Range
  • 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range
  • -20°C ~ 60°C (-4°F ~ 140°F)
Operating Relative Humidity Range
  • 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range
  • 10% ~ 95% (non-condensing)
Parts List (Bulk Package)
  Part Number Qty Description
Motherboard MBD-X11SSZ-TLN4F 1 X11SSZ-TLN4F Motherboard
I/O Cables CBL-0044L 2 57.5CM SATA FLAT S-S PBF
I/O Shield MCP-260-00093-0N 1 Standard I/O Shield for X11SSZ with EMI Gasket
 
Optional Parts List
 
Part Number
Qty
Description
SuperDOM - - Supermicro SATA DOM Solutions [Details]
1U I/O Shield MCP-260-00094-0N 1 1U I/O Shield for X11SSZ with EMI Gasket in CSE-512/813

 

Compatible Products



Sorry, but this product is no longer available to purchase online.

Please contact us to discuss alternative products which may be suitable.
Out
of
Stock

Lease this product for only 9.15 per month

Learn More Today
Leasing Terms & Conditions Apply. Subject to Status. Minimum order of 1000+VAT to qualify. Minimum term of 24 month lease. Lease example shown is for a 36 month lease.