Supermicor X9DRD-7JLN4F

MBD-X9DRD-7JLN4F-O
Supermicor X9DRD-7JLN4F
Sorry, but this product is no longer available to purchase online.

Please contact us to discuss alternative products which may be suitable.

Key Features

  1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and future E5-2600 v2 family
  2. Intel® C602J chipset; QPI up to 8.0GT/s
  3. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
  4. Expansion slots: 6 (x8) PCI-E 3.0
  5. Intel® i350 GbE LAN (4 ports)
  6. 4x SATA2 and 2x SATA3 ports
  7. 8x SAS2 (6Gb/s) ports via LSI 2308 IT mode for SAS2 in default (no RAID)
  8. Integrated IPMI 2.0 and KVM with Dedicated LAN
  9. 9x USB 2.0 ports (4 rear, 4 via header + 1 Type A)

Specifications

Product SKUs
MBD-X9DRD-7LN4F-JBOD -O
  • X9DRD-7LN4F-JBOD (Standard Retail Pack)
MBD-X9DRD-7LN4F-JBOD -B
  • X9DRD-7LN4F-JBOD (Bulk Pack)
 
Physical Stats
Form Factor
  • E-ATX
Dimensions
  • 12" x 13" (30.5cm x 33.0cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600
        and future E5-2600 v2 family
        (up to 135W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
  ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602J chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
     SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS2 (6Gb/s) via LSI 2308
  • IT mode for SAS2 in default (no RAID)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Quad Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
 
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 9 USB 2.0 ports total
    (4 rear + 4 via header + 1 Type A)
Video
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port / 1 Header
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Chassis ( Optimized for X9DRD-7LN4F-JBOD )
1U Chassis
2U Chassis
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
  • Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis
 
Expansion Slots
PCI-Express
  • 6 (x8) PCI-E 3.0 slots

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DRD-7LN4F-JBOD MBD-X9DRD-7LN4F-JBOD 1 X9DRD-7LN4F-JBOD Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0097L-03 2 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
AOC-TPM-XENON-IFN - INFINEON TPM XENON BOARD V1 WITH SLB9655TT1.2FW4.32, HF, RoHS/REACH, PBF About TPM



Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal