Supermicro X9DRI-LN4F+

Key Features

1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and future E5-2600 v2 family
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 768GB DDR3 1600MHz* ECC Registered DIMM; 24x DIMM sockets * Depends on memory configuration
4. Expansion slots: 4 x16 PCI-E 3.0, 1 x8 PCI-E 3.0, 1 x4 PCI-E 3.0 (in x8)
5. 4x Gigabit Ethernet LAN ports; Intel® i350 GbE controller
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 9x USB 2.0 ports (4 rear, 4 via header + 1 Type A)

Specifications

Product SKUs MBD-X9DRi-LN4F+ -B X9DRi-LN4F+ (Bulk Pack)   Physical Stats Form Factor Enhanced Extended ATX Dimensions 13.68" x 13" (34.7cm x 33cm)   Processor/Cache CPU Intel® Xeon® processor E5-2600     and future E5-2600 v2 family     (up to 135W TDP **) Dual Socket R (LGA 2011) Cache Up to 20MB System Bus QPI up to 8 GT/s   ** 135W is not supported in 1U rackmount configuration. Motherboard supports this maximum TDP. Please verify your system can thermally support.   System Memory Memory Capacity 24x 240-pin DDR3 DIMM sockets Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets Memory Type 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB Memory Voltage 1.5 V, 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset Intel® C602 chipset AHCI SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 SCU SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® i350 Gigabit Ethernet (x4 ports) Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Video Matrox G200eW   Input / Output AHCI SATA 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) SCU SATA 4x SATA 2.0 ports (3Gbps) LAN 4 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port USB 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A) Video 1 VGA port Serial Port / Header 2 Fast UART 16550 ports: 1 rear and 1 header TPM 1 TPM 1.2 20-pin Header

Chassis ( Optimized for X9DRi-LN4F+ ) 2U Chassis CSE-825TQ-R740LPB CSE-826E16-R920LP 3U Chassis CSE-835TQ-R920B CSE-836BA-R920B Tower / 4U Rackmount CSE-745TQ-R920B CSE-846BE16-R920B CSE-847E16-R1K28LPB Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis   Expansion Slots PCI-Express 4 (x16) PCI-E 3.0 slots 1 (x8) PCI-E 3.0 slot 1 (x4) PCI-E 3.0 (in x8) slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1   Management Software SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 Power Configurations ACPI / APM Power Management Power-on mode for AC power recovery   PC Health Monitoring Voltage Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 6+1 Phase-switching voltage regulator FAN 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED Suspend static indicator LED UID/Remote UID Other Features Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free   Operating Environment Operating Temperature Range 10°C - 35°C (50°F - 95°F) Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)

	Parts List (retail)   Part Number Qty Description X9DRi-LN4F+ MBD-X9DRi-LN4F+ 1 X9DRi-LN4F+ Motherboard I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF I/O Cables CBL-0097L-03 1 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
	Optional Parts List   Part Number Qty Description Heat Sink (optional, not included) - - CPU Heat Sink reference TPM security module (optional, not included) AOC-TPM-XENON-IFN - INFINEON TPM XENON BOARD V1 WITH SLB9655TT1.2FW4.32, HF, RoHS/REACH, PBF About TPM

Write a Review