Supermicro X9QR7-TF+

MBD-X9QR7-TF+-O
Supermicro X9QR7-TF+
Sorry, but this product is no longer available to purchase online.

Please contact us to discuss alternative products which may be suitable.
Looking for Compatible Products?
Product Description

Key Features

  1. Quad socket R (LGA 2011) supports Intel® Xeon® processor E5-4600
  2. Intel® C602 chipset
  3. Up to 1TB* DDR3 1600MHz ECC Registered DIMM; 32x DIMM sockets * Depends on memory configuration
  4. Expansion slots: 2x PCI-E 3.0 x16 and 2x PCI-E 3.0 x8
  5. Intel® X540 Dual port 10GBase-T
  6. 2x SATA3 ports + 4x SATA2 ports
  7. 8x SAS2 ports via LSI 2208
  8. Integrated IPMI 2.0 + KVM over LAN
  9. 8x USB 2.0 ports (4 rear, 3 front + 1 Type A)
  10. 1GB DDR III cache(1333 MHz)

Specifications

Product SKUs
MBD-X9QR7-TF+ -B
  • X9QR7-TF+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 16.4" x 16.79" (41.66cm x 42.65cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-4600 family
  • Quad Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
 
System Memory
Memory Capacity
  • 32x 240-pin DDR3 DIMM sockets
  • Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM sockets
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS2 (6Gb/s) via LSI 2208 controller
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 devices
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Nuvoton W83527HG
 
Input / Output
SATA
  • 2x SATA 3.0 ports (6Gb/s)
  • 4x SATA 2.0 ports (3Gb/s)
SAS
  • 8x SAS2 ports (6Gb/s)
LAN
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 8x USB 2.0 ports total
    (4 rear + 3 front + 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 ports: 1 rear and 1 header
DOM
  • 1 DOM (Disk on Module) power connector
Chassis ( Optimized for X9QR7-TF+ )
1U Chassis
  • CSE-818A-1K43LPB
  • (rev. M required, Air Shroud MCP-310-81809-0B)
2U Chassis
  • CSE-828TQ-R1K43LPB
  • (rev. M required, Air Shroud MCP-310-82805-0B)
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16 slots
  • 2x PCI-E 3.0 x8 slots
 
System BIOS
BIOS Type
  • 16MB SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Main Switch Override Mechanism
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 10x 4-pin fan headers
  • 10x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
Parts List (retail)
  Part Number Qty Description
X9QR7-TF+ MBD-X9QR7-TF+ 1 X9QR7-TF+ Motherboard
I/O Cables CBL-0097L-02 2 IPASS TO 4 SATA 50CM PBF
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.



Reviews

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

Compatible Products

Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Downloads

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

YouTube

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal