TP-Link TL-SL5428E 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Network Switch

Designed for workgroups and departments, TL-SL5428E from TP-LINK provides full set of layer 2 management features. It delivers maximum throughput where you need it � to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. Moreover, TL-SL5428E switch also comes equipped with 2 combo SFP slots, giving you greater network flexibility. This TP-LINK L2 managed switch has robust security and management features. An advanced Access Control List(ACL,L2 to L4) and the TP-LINK strong safeguard provide security coverage from core to edge and protect against broadcast storm, ARP and Denial-of-Service(DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP and RMON, mean faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive Layer 2 Switch, and additional Gigabit capability, TP-LINK L2 fully managed Switch TL-SL5428E can provide you the ideal access-edge solution. The TP-LINK fully managed L2 switch TL-SL5428E provides non-blocking switching solution for a 10/100 fast Ethernet connection.



As to the switching capacity, TL-SL5428E has a non-blocking aggregated bandwidth of 12.8Gbps. It provides 24 10/100Mbps ports and 4 gigabit 10/100/1000BASE-T ports. In these gigabit copper ports, two of these ports are combo gigabit ports, which will be disabled if the corresponding 1000BASE-X SFP slots are used. It can give you greater network flexibility. IP Clustering allows up to 32 TL-SL5428E switches to be managed by a single IP, regardless of geographical locations. With all units identified by a single IP address, the stack could be configured, monitored, maintained as a single object. Traffic running across units in this virtual stack utilizes full-duplex interfaces and network wires, eliminating costly and cumbersome cables, minimizing the impact of any single point of failure. Access Control Lists (ACL, L2 to L4) restrict access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. This is done by hardware, so switching performance would not be compromised. Moreover, the TL-SL5428E switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed.Features

• Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of business critical data
• IEEE 802.1s Multiple Spanning Tree provides high link availability in multiple VLAN environments.
• Support IEEE 802.1d/w Spanning Tree (STP/RSTP)
• IGMP snooping allows the forwarding of multicast packets such as streaming audio and video, without increasing network broadcast congestion.
• Non-blocking Layer 2 Switching Capacity
• GVRP (GARP VLAN Registration Protocol) allows automatic learning and dynamic assignment of VLANs
• Supports 4K active VLAN groups and 4K VLAN IDs
• Q-in-Q increases the network scalability by providing a hierarchical structure
• Supports 802.1P, Class of Service (CoS) with 4 priority queues per port
• Rate limiting confines the traffic flow accurately according to the preset value
• Supports multiple industry standard user authentication methods such as 802.1x, RADIUS Authentication, Guest VLANs
• Supports 512 IP-MAC-Port-VID Binding entries
• IP Source Guard prevents IP spoofing attacks such as DoS
• Port Security enhances the security of all ports
• L2/L3/L4 Access Control Lists restrict untrusted access to the protected resource
• Virtual stackable provides high scalability and easy Single-IP-Management
• Supports Telnet, Cisco like CLI, SNMP v1/v2/v3, RMON and web access
• Supports SSL and SSH encryptions
• Port Mirroring enables monitoring selected ingress/egress traffic

Specifications

Compliance
Standards Compliance	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3ad, 802.3x, IEEE 802.1D, 802.1p, 802.1Q, 802.1v, 802.1w, 802.1X, 802.1s, IEEE 802.3ac, RFC 1541, RFC 1112, RFC 2236, RFC 2618, RFC 1757, RFC 1157, RFC 2571, RFC 2030
Safety	CSA/CUS (CSA 22.2. NO 60950-1 & UL60950-1) TUV/GS (EN60950-1) CB (IEC60950-1)
Electrical
Voltage/Power/Frequency	100 to 240VAC / 30W / 50 to 60Hz
Power Adaptor Type	AC
Environmental
Environmental	Operating Temperature 0 to 40�C - Humidity 10 to 90%
General
Model Name	TL-SL5428E
Product Type	Network Switch
Barcode	6935364020873
Interfaces/Ports
Network Speeds Supported	10/100 + 10/100/1000MBps
Fixed Ports	24 port(s) x RJ-45 , 10/100Mbps ,
Dual Personality Ports	2 port(s) x RJ-45/SFP , 10/100/1000Mbps ,
Network Slots	2 slot(s) x SFP ,
Console Ports	1 x RJ-45
Performance
Backplane	12.8Gbps
MAC Addresses	8,000
Packet Forwarding Rate	9.5mpps
Physical
Dimensions	44.0cm (W) x 26.0cm (D) x 4.4cm (H)

Write a Review

Name *

Email *

Your Rating

Your Review*