Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & v2 series,
2nd Gen Core i3 processors*
2. Intel® C202 PCH Chipset
3. 4x 3.5" Hot-swap SATA2 HDDs
4. 1x PCI-E 3.0* x8 Full-height slot
5. Up to 32GB DDR3 ECC 1333MHz /
1600MHz* UDIMMs in 4 sockets
6. Intel® 82579LM and 82574L,
2x Gigabit Ethernet LAN ports
7. IPMI 2.0 on Dedicated LAN port
8. 6x SATA 2.0 with RAID 0, 1, 5, 10
9. 400W Redundant Power Supplies
10. Disk-on-module (DOM) power
connector
|
SYS-5017C-MTRF |
- SuperServer 5017C-MTRF (Black)
|
|
|
CPU |
- Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen Core i3 processors *
- Socket H2 (LGA 1155)
|
|
|
Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1600*/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
- 6x SATA 2.0 (3Gbps) w/ RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® 82579LM and Intel® 82574L,
2x Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
|
Super I/O |
|
Clock Generator |
|
|
|
Serial ATA |
- 4 SATA ports
- 4 SATA hard drives supported
|
LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB rear ports
- 1x USB Type-A
- 6x USB ports via header
- Total 9 USB 2.0 Compliant
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Ports |
- 2x USB ports
- 1x Serial COM Port
|
|
|
PCI-Express |
- 1x PCI-E 3.0* x8 Full-height slot
|
|
|
Hot-swap |
- 4x 3.5" Hot-swap SATA2 HDDs w/ RAID
|
|
|
1U SATA HDD Backplane |
|
|
Fans |
- 4x 4cm 12,500 RPM PWM fans
|
|
400W (1+1) Redundant SuperCompact Short-depth AC-DC high-efficiency power supply with PMBus and I2C |
AC Input |
- 400W: 100-240 V, 50-60 Hz, 6-3 Amp
|
DC Output +5V standby |
|
DC Output +12V |
|
With Power Distributor |
- +5V: 25 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
|
|
|
BIOS Type |
- 8Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
MOTHERBOARD SPECIFICATION
Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & E3-1200 v2
series, 2nd and 3rd Gen Core i3
processors***, Pentium, Celeron
2. Intel® C202 PCH Chipset
3. Up to 32GB DDR3 ECC 1333MHz /
1600MHz*** UDIMMs in 4 sockets
4. Intel® 82579LM and 82574L,
2x Gigabit Ethernet LAN ports
5. 6x SATA 2.0 with RAID 0, 1, 5, 10
6. 2x (x8) PCI-E 3.0*** in x8 slots and
1x (x4) PCI-E 2.0 in x8 slot
7. 9x USB 2.0 ports
(2 rear + 6 via header + 1 Type-A)
8. Integrated IPMI 2.0 with KVM and
Dedicated LAN
|
MBD-X9SCL-F -B |
|
|
|
Form Factor |
|
Dimensions |
- 9.6" x 9.6", (24.4cm x 24.4 cm)
|
|
|
CPU |
- Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** *
- Socket H2 (LGA 1155)
|
|
|
Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
- 6x SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® 82579LM and 82574L, 2x Gigabit LAN ports
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
- BMC integrated Matrox G200
|
Super I/O |
|
|
|
Serial ATA |
- 6 SATA 2.0 ports
- 6 SATA hard drives supported
|
LAN |
- 2x Gigabit Ethernet LAN ports:
Intel® 82579LM and Intel® 82574L
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A)
|
VGA |
|
Serial Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
DOM |
- 1x DOM (Disk on Module) power connector
|
TPM |
|
|
|
|
|
1U Chassis |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
|
|
PCI-Express |
- 2 (x8) PCI-E 3.0 in x8 slots***
- 1 (x4) PCI-E 2.0 in x8 slots
|
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
Facebook
Twitter
LinkedIn
Instagram
Call us today on 01283 576162 to talk directly to one of our server specialists
Who we are
Europe's specialist value added distributor of server chassis, server components and server systems.
Server Case is a specialist server chassis distributor based here in the United Kingdom, with an extensive range of 19” rackmount cases built to suit a variety of environments; including remote industrial servers and everything in between. Furthermore, our distribution partnerships have allowed us to develop and deliver Server Barebones and fully configured systems to the vast IT Channel and Enterprise customers.
Latest Blog
Exploring the World of Barebone Servers: A Comprehensive Guide
Posted on: 5th Apr 2024
In the ever-evolving landscape of information technology, businesses are constantly seeking efficient, cost-effective solutions to meet their server needs. One option that has gained popularity in recent years is the barebone server. Offering a customisable, budget-friendly alternative to pre-built servers, barebone servers provide businesses with the flexibility to tailor their hardware to specif... [...] Read more
Latest Video
View more of our reviews, unboxing and installation videos on YouTube.
Business Links
Site Information