Supermicro MicroBlade 6U Enclosure W/4x 1600W PSU

Space Optimization
Housed within a 19" industry-standard rack, MicroBlade servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.

Up to 28 Blade (112 nodes) can be installed in a 6U chassis. Compared to the 20U of rack space that twenty 1U servers would normally require as individual servers, the MicroBlade provides more than 50% density savings with 6272 Avoton cores per 42U rack.

Cable Reduction
The MicroBlade server chassis enclosure greatly simplifies the cabling by aggregating cabling of servers together. Up to 99% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.

Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers. 

Specification

Enclosure MBE-628L-416 (4x PWS)
Processor Blade	Up to 28 hot-plug processor blades
Module Support	Supports Intel® based blades
LED	Power LED, Fault LED
GbE Switch / Pass-Through Module	Supports up to four hot-plug IntelFM5224 with 56x 2.5Gbps downlinks; 2x 40Gbps QSFP or 8x 10Gbps SFP+ uplinks and 1Gbps RJ45
Management Module	Supports up to two hot-plug Chassis Management Modules (CMM) providing remote KVM and IPMI 2.0 functionalities Management module not included in the enclosure
Power Supply	Up to four hot-swap High-efficiency 1600W, N+1 or N+N redundant power supplies
Cooling Design	Up to 8 cooling fans
Dimensions (HxWxD)	10.43" x 17.67" x 32"
Available Models	MBE-628L-816 - Enclosure chassis with eight High-efficiency 1600W power supplies   MBE-628L-416 - Enclosure chassis with four High-efficiency 1600W power supplies + four fan modules



Write a Review