Product SKUs | |
SYS-7033A-T |
|
SYS-7033A-TB |
|
Motherboard | ||
Super X5DAL-TG2 |
||
Processor/Cache | ||
CPU | • Dual mPGA604 ZIF Sockets • Supports up to two Intel® Xeon®processor(s) with 512KB L2 (or 1MB L3) integrated Advanced Transfer Cache up to 3.06GHz |
|
System Bus | 533MHz/400MHz system bus | |
System Memory | ||
Memory Capacity | • Four 184-pin DIMM sockets • Supports up to 8 GB DDR266/200 memory • Dual channel memory bus • Memory must be populated in pairs |
|
Memory Type | DDR266/200 Registered ECC or Unbuffered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | |
On-Board Devices | ||
Chipset | • Intel® E7505 chipset • MCH + ICH4 + P64H2 |
|
Serial ATA | • Dual Silicon 3112A controllers • Four Serial ATA ports • RAID 0, 1 Supported • RAID 0, 1, 5 Supported WITH ZCR Card (ZCRINT) |
|
Network Controllers | • Dual Intel® 82546EB Gigabit Ethernet • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
Input / Output | ||
AGP | 8x/4x AGP Pro | |
PCI Expansion | • 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot • 1x 64-bit 100/66MHz PCI-X (3.3V) slots • 2x 32-bit 33MHz PCI-X (5V) slots |
|
IDE | • Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
USB | Up to 6 USB 2.0 ports | |
Serial Ports | 2 Fast UART 16550 serial ports | |
Parallel Port | 1 ECP/EEP parallel port | |
Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | |
Keyboard / Mouse | PS/2 keyboard and mouse ports | |
System BIOS | ||
BIOS Type | 4Mb Flash EEPROM with Phoenix® BIOS | |
BIOS Features | • Plug and Play (PnP) • SMBIOS 2.3 • APM 1.2 • DMI 2.1 • ACPI 1.0 • RTC (Real Time Clock) Wakeup • BIOS rescue hot keys • Hardware BIOS virus protection |
Chassis | ||
Form Factor | • Mid-Tower | |
Model | SC733T-450 | |
Dimensions | ||
Height | 7" (178mm) | |
Width | 16.8" (427mm) | |
Depth | 20.9" (531mm) | |
Weight | 39 lbs (17.7kg) | |
Available Colors | Beige, Black | |
Front Panel | ||
Buttons | • Power On/Off button • System Reset button |
|
LEDs | • Power LED • Hard drive activity LED • Network activity LED • System Overheat LED |
|
Ports | 2x Front side USB ports (2.0 ready) | |
Drive Bays | ||
Hot-swap | 4x 3.5"SATA hot-swap drive bays | |
Peripheral Bay | • 2x 5.25" full-height peripheral bay • 1x 3.5" full-height peripheral bay |
|
System Cooling | ||
Fans | • 1x 12cm exhaust thermal fan • 1x 9cm mounted thermal cooling fan • 2x 8cm fans (450W power supply configuration) |
|
Power Supply | ||
450W Low-noise AC Power Supply (w/ PFC) width Redundant Cooling Feature | ||
AC Voltage | • 100 - 240V, 50/60Hz, 10 Amp | |
DC Output | • 5V + 3.3V ≤ 160W • 12V + 5V + 3.3V ≤ 430W |
|
+5V | 26 amp | |
+5V standby | 2 amp | |
-5V | 0.5 amp | |
+12V | 30amp | |
-12V | 1 amp | |
+3.3V | 30 amp | |
PC Health Monitoring | ||
CPU | • Monitors for CPU Cores, +3.3V, +5, ±12V, 3.3V Standby • CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V • Adjustable CPU clock frequency ratio settings (via BIOS) |
|
FAN | • Total of six 3-pin fan headers • 4x fans with tachometer monitoring • Overheat backup fan connector • Status monitor with firmware/software on/off control |
|
Temperature | • Monitoring for CPU, chassis, environment • CPU thermal trip support |
|
LED | • CPU Overheat LED • System Overheat LED • Suspend-state indicator LED |
|
Other Features | • Chassis intrusion detection (through LDCM) • Chassis intrusion header |
There are currently no reviews against this product. Be the first to write a review!
Sorry there are no compatible products listed. Please contact us to discuss options available for this product.
There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.
Facebook
Twitter
LinkedIn
Instagram
Call us today on 01283 576162 to talk directly to one of our server specialists
Who we are
Europe's specialist value added distributor of server chassis, server components and server systems.
Server Case is a specialist server chassis distributor based here in the United Kingdom, with an extensive range of 19” rackmount cases built to suit a variety of environments; including remote industrial servers and everything in between. Furthermore, our distribution partnerships have allowed us to develop and deliver Server Barebones and fully configured systems to the vast IT Channel and Enterprise customers.
Latest Blog
Exploring the World of Barebone Servers: A Comprehensive Guide
Posted on: 5th Apr 2024
In the ever-evolving landscape of information technology, businesses are constantly seeking efficient, cost-effective solutions to meet their server needs. One option that has gained popularity in recent years is the barebone server. Offering a customisable, budget-friendly alternative to pre-built servers, barebone servers provide businesses with the flexibility to tailor their hardware to specif... [...] Read more
Latest Video
View more of our reviews, unboxing and installation videos on YouTube.
Business Links
Site Information